You watch about possible errors arising from
(1) folding table wearing sauna, completely wrong.
Waterproof to a depth at because no matter how many meters can not be sauna, may be known on the appearance of time will not have any problem, in fact, has been against movement. Since the appearance of the watch pieces are from different expansion coefficient of materials, if the folding table wear environment temperature greater than or equal to 50 degrees, the table will have a bad pressure, at atmospheric pressure under the table, the air will be outward run, when the temperature is to restore the bad, the outside air is back to the table. Steam bath temperature higher than the standard large table, where the air will run out when the humidity is higher than standard air, some at the table does not necessarily occur immediately water vapor, but suddenly encountered a low temperature when the temperature is higher than the table standard air condensation on the glass, the formation of water droplets or fog, and steam heat will accelerate the aging of waterproof apron, not the protection of movement.
(2) of the condensation droplets form a mirror to confirm for the sapphire crystal;
This approach is unscientific approach.
Because some mineral glass condensation will also drop, and some on sapphire crystal droplets will disperse, but the degree is the same as anti-wear, table mirror material for which manufacturers will be made clear, and to try not to use water droplets.
(3) quartz watch battery replaced after no longer waterproof, and is not accurate when the go: This opinion is wrong.
Zhongfu the repair of equipment very well, give you replaced the battery in after the major instruments used by professional technicians to re-suppressed, re-waterproof, measurement error Whether or not going at the normal time period. So please at major repair stations must replace the battery.
(4) friction surface, is zoned glass table Antiwear confirmed acts, but we do not recommend customers to experiment with disruptive behavior.
Another high-tech ceramic Although a high degree of anti-wear, but fragile, and afraid of crashing fall.

Why will appear sometimes steel watchcase?
By the general conditions of all-steel table and will not rust, but everything is relative. Many different types of stainless steel. Emissions from human sweat contains hydrochloric acid ingredients, table wear at the hands of, if the long-term erosion by sweat or allow the accumulation of acid-base instead of salt, remove dirt, watchcase will gradually appear, especially low back cavity prone. Therefore, should pay attention to watch the normal maintenance, always wipe up dust watchcase sediments, sweat and so on. In addition, should try to avoid strong acid, alkali and other occasions to wear under the table to operate, so that steel will not appear watchcase.

Watch as a high-precision timing equipment, and art jewelry, proper use and maintenance of essential and be able to extend the service life of precision watches and pieces of the beautiful appearance to make it more convenient for your work and life.
1, about the appearance of pieces of maintenance
(1) Case with strap:
Watchcase watch strap for a variety of materials, such as tungsten titanium alloy, high-tech ceramic, stainless steel, soft fiber, such as ordinary steel, try to avoid when wearing more than or the same hardness of the special body friction, carom. Regular cleaning watchcase strap
Is also very necessary, addition of sea water, brine bath, perfume, shampoo, nail polish, nail containing water and some chemicals in cosmetics and so on, watch the gold-plated layer and metal surface must have corrosion, and should avoid contact.
(2) Table mirror:
Table Mirror watches can be divided into the synthesis of the basic, mineral glass, sapphire crystal glass. The wear resistance of synthetic less scratch-prone, but highly resistant to impact force; sapphire crystal glass and wear engage in, but brittle material than the fear of violent collision; mineral qualities of glass in between. Even if the wear-resistant sapphire crystal glass should also pay attention to objects of other diamonds, grindstone, sandpaper, nail file, stone flower Net noodle, concrete walls, etc. contained impurities, so as not to scratch the surface.
2, about waterproof watches
30 meters Waterproof: Yes Living means waterproof, hand-washing, wash, get wet in the rain, splashing water, such as cars.
50 meters Waterproof: applicable to fishing, car washing, showers, swimming and so on.
100 meters above the water: apply to diving, submarine tours, etc..
3, on the quartz watch
Should be regularly replaced batteries, replacement batteries should be replaced simultaneously seal, and waterproof test (general battery power for 1-2 years time frame). Some tables have prompted the replacement battery functions, should be prompted at 3 weeks after the battery replaced.
4, about mechanical watches
2-3 years should be at one times maintenance movement, such as cleaning come on. If not wearing a long-term should also be regularly tighten, so that machine-chip rotation period.

Why do quartz watches mechanical watches than the quasi-?
Ordinary quartz electronic watches daily error less than 0.5 seconds, a few mechanical watches are one-tenth, which is mainly due to quartz crystal oscillators form a high and stable oscillation frequency. High frequency quasi-going when the truth is that people in long-term research how to improve the accurate clocks go when they find a principle, the higher the frequency of oscillator, oscillating more stable, stronger anti-interference ability, watches more accurate. Quartz electronic watches the oscillation frequency of 32768Hz, before quickly than ordinary mechanical watch 3Hz per second high-frequency 10,000 times. Therefore quartz electronic watches more accurate than mechanical watches. In addition mechanical watches because of structural problems in table body, the role of Earth’s gravity, horizontal position and vertical position of the offset potentiometer will produce, spring up from tight to relaxed, torque imbalance, coupled with at outside temperature, magnetic field, vibration, etc. impact, mechanical watches, even if further enhance some frequencies, it is impossible to achieve precision quartz electronic watches.

Waterproof watches in use should pay attention to?
(1) waterproof apron easily degenerate aging, it is necessary to periodically replace or repair at each replaced.
(2) Table glass can damage the water table affect the performance, there should be a timely replacement of damaged.
(3) not to watch in the water or humidity, the operator watches the first handle to prevent the water table into the machine.
(4) handle after the first use of want in the end push, screw button locking handle in the first attention should be paid to watch on, not gap.
(5) watch the water wash to dry at any time.
(6) to prevent exposure to chemical substances watches will be affected watchcase and waterproof apron, reducing water resistance.
(7) watches a long time not to put up on the high temperature (10 60 ℃) and low temperature (-10 ℃) environment.
(8) If there is water aerosol watch point, should be cleared, so as to avoid mechanical rust.

How to judge a watch when going Whether or not accurate?
(1) if the watch every few days on from time to time with the radio time signals are basically the same, this is an accurate table when going.
(2) watches from time to time with the start of radio time signals, but every day there is error after running. While the cumulative increase, but the increase in error every day is the same. If you go when the error does not exceed the quality standards of the table, this is also a qualified table. If the error exceeds the required standards, you can switch speed needle adjust when going to make it more accurate.
(3) If the watches with radio time signals on the table, sometimes, sometimes fast, there is no certain regularity, but the error is very small, probably with the use of status, but also a qualified watch. If the error is too large, there is no law, nor can speed through the needle to adjust the exercise, their accuracy can not be guaranteed, it would take through the proofing overhaul to make it when going with the required standards.

Why should not normally watch wearing waterproof swimming?
Although the general watch seals taken measures to prevent the sweat and the intrusion of harmful gases, but not definitely not water. At the same time watch the process will be used at some inevitable phenomenon: every day be set aside on the needle, shank or handle the first head tube will gradually wear the band. Table glass affected by temperature and will appear on it with watchcase gap; rear cover waterproof apron sweat effects of aging or corrosion, the above will cause the waterproof sheet waterproof performance. Therefore, the general water table can not be wearing go swimming, take a bath. Is washing clothes, washing dishes, cooking time should also pay attention to, not to make the water spilled on table or water vapor into the person table, otherwise mechanical water table will rust, affecting the quality of travel time, or even lose value.

Why should not put mechanical watches is not going to adjust when the error?
Mechanical watches at the time of going to depend largely on the accuracy of balance wheel hairspring generated to ensure the stability of the frequency. Table because of machine use by a lot of factors both inside and outside, causing harmonic vibration hairspring balance wheel so that when the errors go watch carefully so that we can only adjust the relative error decreases, and should not be completely ruled out, therefore, watches go when they meet the Table go when target accuracy, which is qualified table.

Why do some automatic watches the hands of Article institutions to retain?
This has two main roles:
1) if the wearer automatically watches the day when a smaller amount of activity, especially President, can quickly make use of the hands of institutions to be on tight clockwork, not to watch because of a result of inadequate power to shut down.
2) When the automatic failure of the impact of institutions on article, you can be on the use of manual so that the continuation of the use of watches.

Watch an occasional shut down are not the fault?
Watch an occasional shut down, but as long as they can go after the return to normal, whether it be temporary. Since there is some accidental factors: such as on Article forget, forgot to call after advancing the needle shank head, or occasionally in the use of the process of making gossamer hanging by vibration, or a stuck parts such as would give rise to a halt, but then and can restore normal. So watches occasionally stop a problem is nothing, as long as the time when you can go back to normal, but if often appears to shut down, you need to inspect the repairs.

When clocks go bad be regarded as ultra-fault?
Regardless of mechanical watches quartz watch or have corresponding quality standards, must have a go when the error. Go when clocks are relatively accurate, absolutely accurate, that is not bad is impossible to watch, but as long as the clocks go in line with quality standards when is qualified clocks. watches the factory calibration are qualified in accordance with the regulations, at the time of sale should be able to check the calibration again, in line with the standards of the sale, such as individual super-bad, and good proof-reading and then adjust the sale. watches from the use and use conditions are different, the individual will be in use after the ultra-bad (that is, speed error exceeds the standard), which is arising from the use of sinking situation, not a failure, that can be adapted to meet the normal. but when the pace of errors such as going too big and they can not adjust to normal standards, the property can be failure to carry out necessary maintenance.

Watch hours of time to talk about the needle, why not point second request?
When the clock was installed in the gun barrel, the minute hand is mounted on a sub-round of tube up through the inter-round contact with each other to maintain a fixed transmission ratio. At the clock so the whole point, the minute hand has to-point demand. The second hand is mounted on a second axle on, which is transmission gear train, there is no direct contact with the minute hand (ie, points for the entire time, the second hand does not necessarily mean scale up at 60). Touch all the time, only around pin DIP, DIP should not second hand. Even for the whole sub-sub from zero seconds to fit, and after moving out will be uncoordinated. In their daily lives, “points” of the units have been enough, the second has no practical significance. So at the assembly, “second” pin can be loaded anywhere.

Watch our country soaring consumer trends.

A few days ago, Nanjing Golden Eagle Shopping Center Xinyu Lists Sambo Hall on the opening ceremony, dozens of block six-digit price above the top list with the Nanjing consumers had intimate contact. At numerous international list, the price of 811,200 yuan up to 18K pink gold Breguet men’s watch it rose even more consumers. It is reported that Nanjing watches the increasingly higher consumption, imports of watches in 2007 the city sold more than 1 million nationwide top, many international brands are on the front line of watches to be highly concerned about the market in Nanjing, Nanjing people go to Europe, Hong Kong, China and other places in order to to purchase a number of international top-brand watches are expected to have settled in recent years at Golden Eagle.

At the opening ceremony, the 11 models displayed Blancpain, Breguet, ten thousand country Lists, etc., as well as pen name, design the atmosphere, exquisite workmanship, inlaid dazzling diamonds so spectators can not help but watch it echocardiography. Want one of the most expensive few 18K pink gold Breguet men’s watch, the table diameter of 35 millimeters, watches 6:00 Tourbillon location has shown that apart from tourbillon device to watch the elimination of errors caused by gravity, but also to make watches When going more precise, manually on chain movement, silver-plated dial gold band patterns are hand carved, even the layman to understand the table amazed its superb technology, in addition to In addition, sapphire crystal watch also very special, not only waterproof ability, through also can see the internal structure of watches. It is learned, which watches the market price of 811,200 yuan.

In addition, 601,500 yuan for a box spring time table has also aroused interest in many consumers, the table will be timed to overlap the small dial a way to re-design, in order to prevent the time the second hand with other indicators of collisions, time-second hand disk to do a heightened level of settings, the calendar has large windows, unique style.

According to vice president of Golden Eagle Retail Group, Su said that in 2056, the Nanjing watch thriving consumer can use to describe the annual growth rate of more than 40%, from the Nanjing Golden Eagle Sales, the high-end table has been accounted for total sales watches more than half. “The first two years of consumer buys watches, the average price at between 3-50000, and in recent years, some consumers more willing to buy than a hundred thousand dollars of watches. Xinyu Sambo Lists boutiques at just the past month soft opening period, average sales at 6-100000 yuan. “

08 Pre-SIHH Panerai Luminor Marina Automatic watch.

Model: pam00299 / stainless steel / op iii Automatic movement / hour, minute, small second, date display / Switzerland Observatory (cosc) certification / David frequency 28,800 times per hour / table diameter 44mm / arc sapphire crystal mirror / Waterproof 300 meters

luminor marina automatic watch on chain 44 millimeters series are modern (contemporary collection) of an astronomical table (chronometer), This watch is equipped with innovative details into the newest metal strap design, fitting wrists up to wear and beautiful and comfortable. New metal chain belt is designed to create a natural integration with the watchcase watch chain, like the perfect extension of watchcase as seamless, as if at the same time from the hands of the same craftsman. Luminor watch this at first with a leather strap, Panerai engineers spare no efforts for the new injection of such a metal chain with leather unique “flexibility.” Engineer through the junction of special shape design, so that at length and the width of a curve on a two-way to achieve this objective. This Division details the achievements of the touch and pleasant, comfortable to wear with metal chain. Since the width is also a link from the watchcase Department gradually reduced to 24 millimeters of the tail 20 mm, so from an aesthetic point of view, the strap and watchcase seamless. But more than that in the compact design: Matte junction after treatment, the contact point with the watchcase uses deal with mirror-polished so that it forms a circle with the case and quite different from similar effects. The new metal chain belt does not replace the metal chain over the past Panerai band (and a half months by the rectangular metal combination) or the traditional crocodile leather or rubber strap, they are replaced with each other simple, give consumers greater choice Spaces. Luminor marina watch at 44 millimeters in diameter in the watchcase contains the classic Panerai dial up dial engraved with Arabic numerals and hour of large scale, is also clearly visible at night. Pointer on the material is also coated with fluorescent superluminova (strong Noctiluca), a small stopwatch on the pointer is also set to do the same deal, and with the traditional model luminor like dial at 9 o’clock position. 3 o’clock position there is a small zoom lens used to read the date, dial lens installed in the protection of anti-reflective sapphire glass, the glass thickness of 3.5 mm, can withstand the seabed.

Panerai LUMINOR MARINA left-handed wrist watch PAM026.

The Panerai watch in accordance with the output of the most scarce during the watch of a famous classic re-build, are designed for raids during World War II dive-fu to create one of the table section. This manual on chain 44 millimeters lefty luminor marina watch Panerai introduced this year are the special limited edition watch, limited worldwide production of only 1000. Many details of the Panerai watches and the history of the period known in the world are closely linked. The 1940s, Panerai produced a very small quantity of the special table, the list on its crown and the surrounding retaining Bridge 9 o’clock position and alignment, rather than place the general location is located at 3 o’clock, so at the left wearing commando without a compass or depth of the location of wear watches, they can be removed at the right hand up, let his left hand to control wrist watch crown.

Panerai watches double up needle time.

 Panerai re-launched in 2009 specifically for the “Panerai Classic Yacht Challenge” (panerai classic yachts challenge, pcyc) tailored for the limited edition watch, Panerai and Memory Origin of the world’s oldest ocean. By the origin of Panerai in Florence, sponsored by the International Classic Yacht Race has witnessed many of the most rare antique yacht, a result of the restoration, once again restore the old glory and join in the Mediterranean and the Atlantic, held a series of international yacht race.

With the past, this limited edition luminor 1950 regatta rattrapante 44 mm double-needle classical recovery time sailing watch (pam00332) the world’s limited production 500, each would have its own number. Watch with dual time function to recover the needle, Switzerland Observatory (cosc) certification, available at sailing classical five minutes before the countdown, the table belong to a high degree of professionalism, the really are the navigational equipment, regardless of the name from the table, paragraph or technical content point of view, all indeed lived up to its name.

With the 2008 version are different, the new Classic Regatta Chronograph assembly designed especially new watchcase, stainless steel is no longer used for polishing, but after treatment of black DLC coating. DLC mean are the crystallization of carbon (diamond-like-carbon), can be processed so that after the metal has become more rigid, but also more resistance to abrasion and corrosion resistance, these qualities of sea water for people who come into regular contact (such as sailor ) is especially important, because DLC coating is not prone to other metal polishing flow often occur, including wear and tear and injury.

This luminor 1950 regatta rattrapante 44 mm double-needle classical recovery time sailing watch Case diameter 44 millimeters, in the three buttons, list on crown and bridge retaining lever DLC coatings are used. Guarding the bridge lever luminor watches are one of the characteristics, with crown protection and sealed waterproof dual function. Water depth of 100 meters (10 bar), spin-in polishing to handle, engraved Classic Regatta logo, version of the year, and this form paragraph number and production quantity.

2 mm thick anti-reflective sapphire crystal glass table mirror, black dial Paris nail pattern, showing a close Nassarius, with deep feeling. Noodles on plate decorated with two Arabic numerals, screw-style button-hour mark. Pointer around the needle with luminous paint, and the top of the central timing indicator was blue, the top with a small luminous point. Speed dial plate on the outer edge of the noodle, and minutes after, at five-minute countdown mark in blue on decorating to do.

luminor 1950 regatta rattrapante 44 mm dual classic sailboat chasing the needle assembly op xviii Chronograph Automatic movement, diameter 13 ¼ law points, double guide column round, with the recovery of high-quality needle time stopwatch features. Recovery time can be double-needle time two events simultaneously. When the start time, the two overlapping central time at eight o’clock direction of the second hand the button is pressed, the bottom of the central time the second hand will stop, record the first time. The top of the central guiding principle will continue to operate until the two o’clock by the put is pressed. Table box and lever retaining bridge installations polishing grinding, swiss movement also adopted the official Observatory (cosc) certification.

luminor 1950 regatta rattrapante 44 mm double-needle classical sailing time to recover with a Panerai watch strap made of leather, polished clasp and engraved logo has Panerai. Attached to a back-up strap and a small strap replacement tools.

Panerai watches double up needle time.

Panerai re-launched in 2009 specifically for the “Panerai Classic Yacht Challenge” (panerai classic yachts challenge, pcyc) tailored for the limited edition watch, Panerai and Memory Origin of the world’s oldest ocean. By the origin of Panerai in Florence, sponsored by the International Classic Yacht Race has witnessed many of the most rare antique yacht, a result of the restoration, once again restore the old glory and join in the Mediterranean and the Atlantic, held a series of international yacht race.

2008 Pre-SIHH: Panerai LUMINOR MARINA Automatic 44 millimeters watch.

Luminor and marina Name the two people immediately think of Panerai (officine panerai) the major strong points: always desirable, but not continuously at the water Under the watch to wear, it is also decorated with underwater use fluorescent dial required. luminor marina automatic watch on chain 44 millimeters series are modern (contemporary collection) of an astronomical table (chronometer), This watch is equipped with innovative details into the newest metal strap design, fitting wrists up to wear and beautiful and comfortable.

luminor watch Designed during the Second World War by a major diving history table – Panerai’s radiomir evolved. radiomir watch since starting in 1938 was selected for the Italian Navy’s underwater shock troops dedicated table. Radiomir year compared with, luminor dial luminescent materials used tritium-based rather than laser, but the most obvious difference between the most important in its crown waterproofing system. watch radiomir spin-in crown, but also because of it every time, or adjust the chain on the time required to open such as screw-like rotating crown and after the completion of re-screwed, so long-term use of crown and thus prone to cause wear watches influent. In order to solve this problem, Panerai has designed a new device, installed at the connection to watchcase insert retaining the bridge control lever. The control rod to the open, on the crown to adjust the chain and arbitrary pointer; when the control lever down again when pressure on the crown, to squeeze into the watchcase and sealed to ensure that the only way to achieve Level waterproof.

Since then, all luminor watches are equipped with continuous improvement through the connection bridge and lever device (which is retaining crown Bridge), but also by the comprehensive test show that its waterproof to a depth of up to 300 meters and can withstand greater stress. These features are integrated into the new luminor marina automatic watch on chain 44 millimeters. This watch the watchcase, table back and crown are guarding the bridge made of the use of matte stainless steel, table circle uses different styles of polished stainless steel. In addition, different styles of surface treatment technology to create a contrasting look is also new metal chain with a feature of this watch can not only enhance the aesthetic value, above all to make it more harmonious with the watchcase to integrate . Case and strap seamless integration, which is due to ear from top to bottom table junction between the two precision bonding, as well as perfect fit watchcase circular junction. New metal chain belt is designed to create a natural integration with the watchcase watch chain, like the perfect extension of watchcase as seamless, as if at the same time from the hands of the same craftsman. Luminor watch this at first with a leather strap, Panerai engineers spare no efforts for the new injection of such a metal chain with leather unique “flexibility.” Engineer through the junction of special shape design, so that at length and the width of a curve on a two-way to achieve this objective. This Division details the achievements of the touch and pleasant, comfortable to wear with metal chain. Since the width is also a link from the watchcase Department gradually reduced to 24 millimeters of the tail 20 mm, so from an aesthetic point of view, the strap and watchcase seamless.